Disconnect Switch & Electrical Whip Kits for Heat Pump and A/C Condensers (9K–60K BTU)
Disconnect Switch & Electrical Whip Kits for Heat Pump and A/C Condensers (9K–60K BTU)
Disconnect Switch & Electrical Whip Kits for Heat Pump and A/C Condensers (9K–60K BTU)
$98.87
/
){kind=link}
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Disconnect Switch & Electrical Whip Kits
Complete, code-conscious power kits for ductless mini split condensers from 9,000 to 60,000 BTU. Choose #10 AWG (1/2" x 6 ft) or #8 AWG (3/4" x 6 ft) to match your system’s amperage needs and streamline a safe, professional installation.
Available Options
#10 AWG Kit — Standard Power
- Compatible: 9K, 12K, 18K, 24K, 27K BTU condensers
- Whip: 1/2" x 6 ft electrical whip with flexible conduit
- Connector Size: 1/2" weather-tight connectors (for unit/electrical box knockouts)
- Wire Gauge: 10 AWG
Right-sized for lower-capacity systems. Provides reliable power delivery without overloading smaller units.
#8 AWG Kit — Heavy-Duty Power
- Compatible: 27K, 36K, 48K BTU condensers
- Whip: 3/4" x 6 ft electrical whip with flexible conduit
- Connector Size: 3/4" weather-tight connectors (for unit/electrical box knockouts)
- Wire Gauge: 8 AWG
Built for higher amperage and minimal voltage drop on larger systems.
What’s Included
- Non-fusible HVAC disconnect switch
- Pre-wired electrical whip (6 ft flexible conduit)
- Weather-tight connectors (1/2" for #10 AWG kit, 3/4" for #8 AWG kit)
- Locknuts and fittings for secure, weather-resistant connections
- Durable outdoor-rated conduit
Features & Benefits
- Right Gauge, Right Fit: Choose #10 or #8 AWG to match condenser capacity.
- Faster Installs: Pre-wired whip and included connectors save time on site.
- Service Safety: External disconnect supports safe maintenance procedures.
- Broad Compatibility: Works with most mini split brands (MrCool, Daikin, GWIN, Goodman, etc.).
Specifications
| Feature | #10 AWG Kit | #8 AWG Kit |
|---|---|---|
| BTU Range | 9K–27K | 27K–48K |
| Whip & Conduit | 1/2" x 6 ft | 3/4" x 6 ft |
| Connector Size (Weather-Tight) | 1/2" | 3/4" |
| Voltage / Frequency | 208/230V, 60Hz | |
The recommendations below are general guidelines. Always follow the equipment nameplate, breaker sizing, and local electrical code. When in doubt, consult a licensed electrician.
Single Zone Condenser
- 9K, 12K – #12 Minimum, #10 Preferred
- 18K – #10 Preferred
- 24K – #10 Preferred
- 36K – #10 Preferred
Multi-Zone Condenser
- 18K – #12 Minimum, #10 Preferred
- 27K – #10 Preferred
- 36K – #10 Preferred
- 48K – #8 Preferred
- 60K – #8 Preferred
Central Ducted / Package
- 18K – #12 Minimum, #10 Preferred
- 27K – #10 Preferred
- 36K – #10 Preferred
- 48K – #8 Preferred
- 60K – #8 Preferred
Compatibility
Verify knockout size on your specific unit; this kit includes 1/2" (for #10 AWG kit) or 3/4" (for #8 AWG kit) weather-tight connectors.
Important: Always follow the appliance nameplate, NEC/local codes, and breaker sizing requirements. Conductor length, ambient temperature, and installation method may affect final conductor selection.
Why Choose Freedom HVAC Supply Kits?
Our disconnect switch and electrical whip kits make mini split installations faster and safer. With weather-tight connectors in the correct size, outdoor-rated 6 ft flexible conduit, and your choice of #10 or #8 AWG, your ductless condenser gets clean, reliable power that meets modern installation standards.
FAQ
Q: Which kit should I choose?
A: Generally, choose #10 AWG (1/2") for 9K–27K systems, and #8 AWG (3/4") for 27K–48K. Always confirm against the unit’s nameplate and local code.
Q: Does this work with 208/230V systems?
A: Yes. Both kits are suitable for typical 208/230V, 60Hz mini split condensers.
Q: Are the connectors included?
A: Yes. The #10 kit includes 1/2" weather-tight connectors; the #8 kit includes 3/4" weather-tight connectors.
Pick Up Where You Left Off
Your short list of parts and systems—ready when you are.