Goodman 0171M00002S Induced Draft Motor – Genuine OEM 115V 1PH 0.5A Class B

Goodman 0171M00002S Induced Draft Motor – Genuine OEM 115V 1PH 0.5A Class B

The Goodman 0171M00002S Induced Draft Motor is the precision-engineered "exhaust brain" for your high-efficiency condensing gas furnace. This genuine OEM component is responsible for creating the negative pressure required to pull combustion air through the heat exchanger and safely discharge flue gases through the venting system. Specifically designed for Goodman, Amana, and Janitrol 90% AFUE furnace series, this low-amperage (0.5A) motor ensures that your heating system maintains the exact static pressure needed to close the safety pressure switches. By ensuring a clean and steady draft, it prevents "Ignition Lockout" errors and protects your home by reliably venting combustion byproducts during every heating cycle. 

Key Features and Function:

• Precision Combustion Airflow: Calibrated to the exact RPM requirements of 115V high-efficiency furnaces to ensure proper heat transfer and safe venting of moisture-laden flue gases.
• Genuine OEM Reliability/Fitment: Designed by Goodman Manufacturing as a direct-fit replacement, ensuring the mounting flange and electrical plug align perfectly with the plastic collector box assembly.
• Whisper-Quiet Operation: Features factory-balanced impellers and high-grade bearings to eliminate the grinding and vibrating noises common in aging or generic inducer motors.
• Low-Amperage Efficiency: Draws only 0.5 Amps, reducing electrical load on the furnace control board while providing consistent, heavy-duty venting performance. 

Product Details and Key Specifications:

• Part Number: 0171M00002S (Replaces 0171M00002, 7021-11048)
• Manufacturer: Goodman / Amana (Genuine OEM)
• Part Type: Induced Draft Motor / Combustion Blower
• Voltage: 115V
• Amperage: 0.5 Amps
• HP / RPM: 1/50 HP @ 3400 RPM (Nominal)
• Phase / Hertz: Single-phase (1PH) / 60 Hz
• Insulation: Class B
• Shipping Weight: 3.4 lbs 

🛠️ HVAC Depot Pro Tip: Check the Condensate Drain 

Before installing your new 0171M00002S, inspect the inducer housing and the connected rubber hoses for water buildup. Since this motor is used in 90%+ efficiency furnaces, moisture (condensate) is a byproduct of combustion. If your furnace's drain lines are clogged, water will back up into the inducer motor, causing it to "slosh" or fail prematurely. During your Diagnostic Check, ensure the drain trap is clear. Always use a small amount of high-temp RTV silicone or the provided gasket to ensure an airtight seal against the collector box.

Cross-Reference & Compatibility:

The 0171M00002S is a direct OEM replacement for the following part numbers:

• OEM Numbers: 0171M00002, 0171M00002S, 7021-11048, 702111048
• Fasco / Aftermarket: 7021-11048, 7021-12053, J238-150-15301
• Jakel / Rotom: 119394-00, RFB002 

Extensive Model Compatibility List:

Note: Use 'CTRL+F' to search for your specific model:

• Goodman GMH95 Series: GMH950453BX, GMH950703BX, GMH950904CX, GMH951155DX
• Goodman GCH95 Series: GCH950453BX, GCH950703BX, GCH950904CX
• Amana AMH95 Series: AMH950453BX, AMH950703BX, AMH950904CX, AMH951155DX
• Goodman GMS9 Series: GMS90453BX, GMS90703BX, GMS90904CX, GMS91155DX
• Goodman GDS9 Series: GDS90453BX, GDS90703BX, GDS90904CX
• Amana ACV9 Series: ACV90703BX, ACV90904CX